Full face adventure helmet with customisable peak and antibacterial removable lining
Out of stock
✕
AGV Helmets
S / M / L
Circumference (cm)
2XS
51 - 52
XS
53 - 54
S
55 - 56
MS / M
57 - 58
ML
58 - 60
L
59 - 61
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Lightness, comfort and adaptability reach the highest technological level with the AGV AX9. Its superior modularity allows 4 different configurations by simply removing the peak, ultra-panoramic visor or both, allowing the use of goggles.
Features: •Carbon aramidic fibreglass outer shell construction
•Four density internal EPS lining
•Panoramic viewport offers 190° horizontal and 110° vertical vision
•Anti-scratch visor with 100% Max Vision Pinlock anti-fog insert included
•Ritmo fabric antibacterial cheek pads with moisture wicking and premium comfort treatment
•Antibacterial Shalimar crown pad with moisture wicking and comfort treatment
•Shalimar and Nabuk fabric neck roll with water-resistant treatment
•Removable and washable interiors
•Adjustable chin guard vent that can direct internal air flow
•Top air intakes with rear exhausts
•Grooves for wearing glasses comfortably
•Ready for a generic communication system with spots for speaker installation
•Double D ring chin strap fastening
•Weight approx 1.54kg
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
