Lightweight ACU gold approved helmet with rear aerodynamic spoiler and removable interior
Out of stock
✕
AGV Helmets
S / M / L
Circumference (cm)
2XS
51 - 52
XS
53 - 54
S
55 - 56
MS / M
57 - 58
ML
58 - 60
L
59 - 61
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The K3 SV is an affordable, adaptable helmet with a surprising array of features, including an internal drop-down sun visor, impressive aerodynamic performance, efficient ventilation and an expansive field of vision. The shell is of thermoplastic construction, and the inner liner is of Dry-Comfort fabric.
Features: •Lightweight thermoplastic shell construction
•Two shell sizes for an enhanced optimal fit
•Collarbone safe shape prevents over-extension
•4-density EPS lining for added impact protection
•Aerodynamic rear spoiler for stability at speed
•ACU gold approved for use on a track
•Two rear and five front adjustable air vents
•Dry-comfort internal lining construction
•Fully removable and washable interior
•Integrated internal drop-down sun visor
•Removable breath deflector and chin curtain
•Anti-scratch Pinlock ready Maxvision visor
•Visor can be removed without tools
•Micrometric ratchet neck strap closure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
