The design is optimised for high speed aerodynamic stability, which means this helmet is an excellent choice for sports riding, but also very effective if you ride a naked bike where you are more susceptible to wind forces. Compact and light with a very aggressive image.
Out of stock
✕
AGV Helmets
S / M / L
Circumference (cm)
2XS
51 - 52
XS
53 - 54
S
55 - 56
MS / M
57 - 58
ML
58 - 60
L
59 - 61
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Features •External shell is constructed of CAF (Carbon-Fiberglass) and is manufactured in 2 sizes
•EPS inner lining available in 4 sizes with 4 different densities
•Shell and EPS dimensions are optimized using the FEM (Finite Elements Analysis)
•Ventilation system: IVS consisting of one chin guard vent, 2 front air vents and an air extractor with rear on/off switch
•Central front air vent built into the shell profile with direct high air flow channel
•Rear spoiler integrated into the shell profile
•Removable and washable liner and cheek pads
•Neck roll is made of Shalimar fabric with a water-resistant treatment , preventing water from channeling inside the helmet
•Cheek pads made from Ritmo fabric with Sanitized anti-bacterial treatment, 2Dry moisture wicking, and Microsense treatments
•Crown pad made of Shalimar fabric with Sanitized anti-bacterial treatment, 2Dry moisture wicking, and Microsense treatments
•Includes removable nose guard and wind protector
•Face shield is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
•GT 2-1 (for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
•Face shield is pinlock-prepared
•Pinlock insert lens included
•Visor micro-opening system
•XQRS (Extra Quick Release System) visor mechanism for quick removal of the visor
•Tool-less removable and replaceable integrated scratch-resistant sun visor (ISV)
•Double D retention system
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
