The Custom 500 is the epitome of a classic 3/4 helmet. With 5 shell sizes the Custom 500 is sure to give the rider a personalized fit regardless…
Out of stock
✕
Bell Helmets
S / M / L
Circumference (cm)
2XS
54 - 55
XS
56
S
57
M
58 - 59
L
61 - 62
XL
63 - 64
2XL
65 - 66
3XL
67 - 68
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The Custom 500 is the epitome of a classic 3/4 helmet. With 5 shell sizes the Custom 500 is sure to give the rider a personalized fit regardless of size. The quilted, contrast-stitched, plush interior is wrapped in a carbon fibre shell. Fit and finish are impeccable, and with dozens of shield and visor accessories available, the opportunity to personalize yours is endless. Experience the best in category helmets from those who helped invent truly protective helmets.
Specification •Shield Type: Integrated 5-snap pattern for aftermarket shields and visors
•Construction: Industry-leading carbon composite shell
•Energy Management: Multi-Density EPS Liner
•Certification: ECE and DOT
Features •Custom Suede interior liner
•Five-year warranty
•Leather D-ring pull tab
•Leather goggle strap
•Padded chin-strap with D-ring closure
•1.06 kg weight
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
