The GT6 is developed for racers in closed-car rally environments, with a wide eyeport for extended vision and lightweight carbon glass shell
Out of stock
✕
Bell Helmets
S / M / L
Circumference (cm)
2XS
54 - 55
XS
56
S
57
M
58 - 59
L
61 - 62
XL
63 - 64
2XL
65 - 66
3XL
67 - 68
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The GT6 Rally Pro features the same modern and aggressive design as HP6 Rally, developed for racers in closed-car rally environments, featuring a wide eyeport for extended vision with an lightweight Premium carbon glass shell. The closed-face GT6 Rally Pro integrates the latest technology from ZeroNoise including advanced electronics, high power speakers and noise canceling microphone to assure outstanding performance, sound insulation and communication efficiency.
Features •Lightweight Premium Carbon Fiberglass Composite shell
•Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06)
•Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
•Integrated channels in face piece offering multiple options to install drinking tube and valves
•Flexible sound insulating ear muffs integrated into the interior for comfortable sound insulation
•ZeroNoise® electronics, high power (yet lightweight) speakers and adjustable, efficient noise canceling microphone
•Ultra-reliable heavy duty Female Nexus Connector and external Cord (compatible with other brands of amplifiers)
•Extraction vents to maximize cooling and air circulation
•Factory installed Hans anchors as original equipment
•Draw string helmet bag included
•Interior: Dark Grey High Strength – High Comfort FR Fabric
•Sunscreen Short Shield included (compatible with SE06 shield and 06 Series Peak – sold separately)
•Color: White
•Sizes: 54-55-56-57-58-59-60-61-61+-2XL(63-64)-3XL(65-66)-4XL(67-68)
•Homologation: FIA8859-2015 and SNELL SA2020
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
