Bell MX-9 MIPS Helmet - Fasthouse

Loading...
As low as £169.99
The off-road world is a dirty, tough place. Chunks of rock and dirt mean business when launched by roosting tires, and even when it's muddy, hitting the ground is always hard.
In stock

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

That's why we sweated the details on the MX-9, loading it with a tough polycarbonate shell, MIPS energy management system, an adjustable visor, Velocity Flow ventilation, and a removable, washable, anti-microbial liner for when the time comes to hose down. The MX-9 MIPS packs all these features into one helmet, delivering exceptional value and pro-caliber performance.

Specification
•Construction: Lightweight polycarbonate and ABS shell
•Ventilation: Velocity Flow ventilation system for maximum cooling
•Energy Management: Multi-Directional Impact Protection System (MIPS) to reduce rotational impacts
•Certification: ECE and DOT

Features
•3 shell and EPS sizes for a personalized fit
•EPS-lined chinbar
•Five-year warranty
•Padded chin strap with D-ring closure and strap keeper
•Integrated vented roost guard
•Moisture-wicking, removable and washable air channeled comfort liner
•Antimicrobial interior liner
•1.53 kg weight
More Information
SKUAY6885Z:27041320
BrandBell
GenderUnisex
Product TypeHelmets
Ride StyleAdventure, Motocross
Main MaterialPolycarbonate
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockNot Compatible

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 

Klarna Finance Options

Now you can shop with us and pay later with Klarna.