Bell Qualifier STD Helmet - Rebel

Loading...
The Bell Qualifier STD full-face motorcycle helmet has a lightweight Polycarbonate/ABS shell with aggressive styling for added aerodynamics.
Out of stock

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

It comes with a ClickRelease NutraFog II anti-fog and anti-scratch clear visor as well as a Velocity Flow ventilation system with FlowAdjust exhaust vents for optimum air circulation. The Qualifier also comes with a removable and washable liner with integrated speaker pockets, contoured cheek pads for intercoms, and a padded wind collar to reduce wind and road noise dramatically. It is also ACU Gold approved and has a double D ring fastening system for an ultra-secure closure with a lightweight 1500 (+/- 50g) weight. Also available in various designs and colours - this is the Ascent graphic in the black and red colourway.

Features:
•Lightweight Polycarbonate/ABS shell
•Aggressive styling for added aerodynamics
•ClickRelease NutraFog II anti-fog and anti-scratch clear visor
•Velocity Flow ventilation system with exhaust vents
•Removable and washable liner
•Double D ring fastening system
More Information
SKUAX5489Z:27012092
BrandBell
GenderUnisex
Product TypeHelmets
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockNot Compatible

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 

Klarna Finance Options

Now you can shop with us and pay later with Klarna.