The MT Genesis is a flip-front helmet perfectly suited to touring and urban environments.
Out of stock
✕
MT Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The MT Genesis is a flip-front helmet perfectly suited to touring and urban environments.
Shell •HIRP (High Impact Resistant Polymer)
•Number of shells: 2 [XS-S/ M-XXL]
•Number of EPS: 3 [XS-S / M / L-XXL]
•Sizes available: XS-XXL
•Weight: 1.600/ 1.750g
Inner •Combination of multiple fabrics to offer greater comfort and durability
•All interiors are detachable and washable
•Perfect fit thanks to different interior sizes
•Breathable fabric designed to facilitate moisture wicking
•Breath deflector to prevent screen fogging
•Integrated intercom housing for intercom system speakers
Ventilation •Front and top air vents with open/close system
•Interior air flow channels for temperature and moisture exhaustion
•Air extraction through rear vents to let air out and maximise airflow
•Rear deflector optimises the aerodynamics of this helmet
Visor •MT-V-25B visor
•Sun visor: Retractable sunglasses system with quick-acting mechanism
•Pivoting mechanism optimises fitting and correct adaptation of the visor to the helmet
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
