The new Streetfighter SV S comes with important safety and design evolutions, without losing any of its original essence
Out of stock
✕
MT Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The new Streetfighter SV S comes with important safety and design evolutions, without losing any of its original essence that made it a hugely successful casual helmet.
This versatile, modular helmet provides four combinations that allow the rider to choose the style they prefer for each occasion. The Streetfighter SV S can be worn with or without a visor and the MT-QMRS (Quick Mask Release System) enables the chin guard to be detached.
The Streetfighter SV S easily meets the demanding ECE 22.06 standards and in its latest update, it features upgraded interiors that add impressive value to this model.
Key Features •Composition: HIRP (High Impact Resistance Polymer), a material that combines the best qualities with respect to the safety-weight ratio
•Number of Shells: 2 (XS to M and L to XXL)
•Number of EPS: 2 (XS to M and L to XXL)
•Available Sizes: XS to XXL
•Weight: 1,400 grams +/-50 grams
•4 helmets in one: Streetfighter and Jet, with or without visor; this helmet has four combinations
•MT-QMRS (Quick Mask Release System): designed by MT for quick removal of the chin guard
•To be road legal in the UK this helmet is supplied with a clear visor
•Ventilation: front and top inlets draw in cool air and rear outlets expel hot, humid air. Ventilation covers block air and water entry in case of rain
•Interior lining: new improved design and fabrics result in greater comfort and a better fit, making an even safer helmet
•Hypoallergenic liner fabric pads are removable and washable
•Closure: MT-MDTC (Micrometric Double Teeth Closure) retention system for maximum security
•Bluetooth compatible: prepared for the incorporation of intercom loudspeaker system
•Sports camera mount: an on-board camera mount is included as part of the standard equipment, an accessory that is in great demand by the most technologically savvy riders
•ECE 22.06: The MT Streetfighter SV S offers the highest safety certification. It also has DOT homologation.
•Sun visor: MT-SV-902B
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
