Nexx X.G100 R Helmet - Purist

Loading...
Racing style full face retro helmet with unbreakable anti-scratch visor and X-Mart Dry technology
Out of stock

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

The X.G100 Racer features a very light outer-shell made in X-Matrix technology, a process that combines multiaxial fibreglass, 3D organic fibres, special aramid fibres and carbon reinforcement. It comes in two shell sizes for outstanding comfort and fit. With a wide field of vision, the X.G100 Racer's full visor, made of unbreakable PC Lexan, optical class 1 and anti-scratch coating. The masterly designed interior is both stylish and simplistic and the pinnacle of the X.G100 comfort. The X-Mart dry technology brings a soft touch and a clever cooling system featuring a drying rate, twice as fast as normal cotton and gives extra insulation on colder days. All the interior pieces are fully removable and washable, anti-sweat and anti-allergic.

Features:
•Multiaxial fibreglass construction with special aramid fibres and carbon reinforcement
•Unbreakable anti-scratch wide field of view visor
•X-Mart Dry technology
•Fully removable and washable, anti-sweat and anti-allergic interior
•On/Off switch to control the helmets internal ventilation
•Chin wind stopper to reduce wind noise and draughts
More Information
SKUAK7902Z:259430
BrandNexx
GenderUnisex
Product TypeHelmets
Main MaterialFibreglass
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockNot Compatible

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.