To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
X.Vilijord sits comfortably at the premium-level of Nexx's helmet range. Designed to be versatile and simple, focused on what matters the most to demanding motorcycle Adventure travellers.
Features: •X-MATRIX 2 Shell (Fiberglass, 3D organic fibers, special weaving structural, high-performance organic fibers, biaxial fiberglass twile
•Off Road Peak, aerodynamic and light; designed to provide additional direct air intake and reduce buffeting and vibration at high speed
•Adjustable and removable peak extensor for best sunlight protection
•Aerodynamic design, developed to minimize fatigue on long trips, with the mask closed or open
•Winter Membrane for fresh air flow reduction on cold days
•Off road chin ventilation designed for a proper use on dust and mud environments
•Morfofit –ergonomic fitting of the cheek pads
•Easy to operate mask button and with involuntarily opening safety mechanism
•360º Super Locker with double pivot for maximum mask safety when raised
•Special developed rubber sealing around the mask and the shield for optimum Acoustic Isolation
•PC Lexan Shield Clear with Anti-Fog position and central lock
•X-SWIFT Quick Release visor mechanism
•Visor with recessed cavity for Pinlock
•Panoramic Eye Port
•Integrated Sun Visor with Ergonomic Button Mechanism
•Micro-Metric buckle stainless steel
•Night vision – reflectors on the side, front and back of the helmet
•X.MART DRY Fabrics
•Soft anti-sweat and anti-allergic fabric inner lining
•3D Formed Pad, removable and washable
•Easy Fit for spectacles Wear
•Air Dynamic System - 2 inlet and 2 outlets air-vents
•Removable Breath Guard
•NEXX X.COM 2 Intercom system prepared, with “Plug & Play” easy setup
•Removable Action Camera support on top and side
•Double homologation Full Face and Jet (P/J)
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
