Multi composite flip front helmet with wide viewport, internal sun visor and reduced road noise
Out of stock
✕
Nexx Helmets
S/M/L
Circumference (cm)
2XS
51 - 52
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
3XL
65 - 66
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Style, comfort and performance in a unique modular helmet. Full of technology that allows safety and peace of mind to meet comfort with a multi-composite shell and quick drying, noise reducing luxurious interior.
Features: •X-Matrix technology combines multiaxial fibreglass, 3D organic aramid fibres and carbon reinforcements
•Super strong and lightweight shell, 35% stronger for extension and bending resistance over normal fibreglass
•X-Sensus Vision offers a 15% wider visor viewing angle
•Optical class 1 anti-scratch, Pinlock ready visor
•Internal sun visor filters 99% of UV light, with ergonomic button operation
•X-SWIFT quick-change visor system
•Air Dynamic System ventilation featuring two air intakes and outlets
•Three-dimensionally shaped interior for a perfect fit around the head
•Morfofit format for a perfect fit with seamless lining with multi-channel ventilation
•All liner parts, including neck roll, are removable and washable
•X-Mart Dry technology, a special treatment fabric that dries twice as fast than cotton
•Vortex generators in the chin area to reduce aerodynamic drag
•Double rubber sealing profiles around the visor and inside the mask configured to improve sound insulation
•Single piece, cheek pads and neck roll divert the wind and help reduce unwanted noise
•Locking mechanisms and micrometric strap buckle are 100% stainless steel or special aluminium with anti-corrosion treatment
•Chin bar opening system includes easy-access button and an anti-opening safety system
•Super locker 360º double pivot system ensures secure locking of the chin bar when raised
•Designed to integrate the X-COM 2 Bluetooth intercom system without compromising interior space
•Includes two brackets for mounting your action cameras on the top and/or side of the helmet
•Dual homologation for use in both open and closed configurations
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
