Nexx X.WED 2 Helmet - Hillend

Loading...
Full face touring and adventure helmet with adjustable multi-position peak and action camera support
Out of stock

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

The X.WED 2 helmet from Nexx features a lightweight multiaxial fibreglass shell for extremely high impact resistance. The ventilation system offers optimal air intake thanks to the three-position upper vent. With three shell sizes, the X.WED 2 combines compact dimensions with outstanding fit and comfort. The light and aerodynamic peak reduces buffeting and vibration at high speeds. With supports for an optional action camera, you can capture every moment of your ride.

Features:
•Multiaxial fibreglass construction with special aramid fibres and carbon reinforcement
•An adjustable multi-position peak for less noise and vibration
•Glove-friendly three-position upper air vent for optimal air intake
•Emergency Strap V2 to allow easy and gentle access to an injured riders head
•Special chin shape to reduce chest injury from frontal impacts
•Simple and light quick release visor system with strong safety lock
•Glove-friendly sun visor with an ergonomic button mechanism
•Super lock and anti-fog position visor; prepared for Pinlock fog-free lens
•Chin wind-stopper to reduce wind noise and draughts
•Peak extensor for road or off-road use
•Chin ventilation draws fresh air into the mouth area and reduces water intrusion
•Top and lateral supports for mounting of optional action camera
More Information
SKUAK7397Z:258433
BrandNexx
GenderUnisex
Product TypeHelmets
Main MaterialFibreglass
Helmet LiningNot Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockPinlock Ready

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.