AGV K3 SV Helmet - Mir 2017

The K3 SV was developed with the experience gained from the K3 and during the design process of the top end helmets like Pista GP, Corsa and GT Veloce. Manufactured in 2 shell sizes throughout the size range, the shell is constructed from a High Resistant Thermoplastic Resin (HIR-TH). The interior pads are made from Dri-Lex and microfibre with a sanitising treatment, both the cheek-pads and interior pad are removable and washable. Front air intakes along with rear exhausts for the best ventilation. Simple to use micro-metric fastening system and Share Bluetooth system ready. The optical class 1, non-scratch, polycarbonate visor and very convenient internal sun visor PLUS a Pinlock anti fog insert as standard make this helmet unbeatable value for money.
Out of stock

AGV Helmets

  

S / M / L Circumference (cm)
2XS 51 - 52 
XS  53 - 54 
55 - 56 
MS / M  57 - 58 
ML  58 - 60 
59 - 61 
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
In Stock | Choose any product for delivery message

PRODUCT DETAILS

Features
•High resistant thermoplastic resin shell
•2 shell sizes
•Dri-Lex and microfibre lining
•Full removable and washable interior
•Front and rear ventilation system
•Weighs 1470g (+/- 50g)
•Micrometric retention system
•Share Bluetooth communication system ready
•Pinlock ready Visor
•Internal sun visor
•Extra quick release visor mechanism
More Information
SKUCA6165:6025103
BrandAGV
GenderUnisex
Product Type
Ride StyleNew Biker, Commuter & Scooter, Sports, Touring
Main MaterialThermoplastic Resin
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeRatchet Strap
PinlockPinlock Provided

AGV Helmets

  

S / M / L Circumference (cm)
2XS 51 - 52 
XS  53 - 54 
55 - 56 
MS / M  57 - 58 
ML  58 - 60 
59 - 61 
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.