AGV K3 SV Rossi Winter Test Helmet - Blue

Loading...
The K3 SV was developed with the experience gained during the design process of the Pista GP, Corsa and GT Veloce. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety.
Out of stock

AGV Helmets

  

S / M / L Circumference (cm)
2XS 51 - 52 
XS  53 - 54 
55 - 56 
MS / M  57 - 58 
ML  58 - 60 
59 - 61 
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Availability | Choose any product for delivery message
AGV K3 SV Rossi Winter Test Helmet - Blue
AGV K3 SV Rossi Winter Test Helmet - Blue AGV K3 SV Rossi Winter Test Helmet - Blue AGV K3 SV Rossi Winter Test Helmet - Blue

PRODUCT DETAILS

The K3 SV has a wide appeal and is suitable for all riders looking for comfort and high performance characteristics. Thanks to Computational Fluid Dynamics analysis and wind tunnel testing, the integrated ventilation system provides maximum airflow to the head (through three front vents, chin vent, side vents, and two extractors at the back of the helmet), and the aerodynamics minimize drag, lift and noise, and ensure stability even at racetrack speeds. Two shell sizes and four EPS sizes give the K3SV a generic fit that is both plush and incredibly comfortable (plus AGV's unique solution of offering both specific MS and ML sizes).
More Information
SKUAGH1KSRBLU
BrandAGV
GenderMen's, Unisex
Product TypeHelmets
Ride StyleNew Biker, Sports, Touring
Main MaterialThermoplastic Resin
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeRatchet Strap
PinlockPinlock Provided

AGV Helmets

  

S / M / L Circumference (cm)
2XS 51 - 52 
XS  53 - 54 
55 - 56 
MS / M  57 - 58 
ML  58 - 60 
59 - 61 
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.