Super fibre helmet with multi density EPS liner, VAS Pinlock Max Vision visor and comfortable design
Out of stock
✕
Arai Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The Profile-V is a brand-new helmet from Arai. It has a fresh, aggressive style unique in the range and is designed to welcome riders to the Arai family with the plush comfort, protection and features expected of the brand but also something else – easy access on and off. Like every Arai the Profile-V uses a strong outer shell designed to glance off impact forces, while maintaining integrity, working with a softer one-piece multi-density EPS inner liner to absorb and spread impact energy. It’s designed around the Variable Axis System (VAS) for a smoother shape plus reinforcing Hyper Ridge that lowers the centre of gravity and flares out 5mm to make putting it on or off easier. It’s equipped with dual intake vents, brow vents and a 3-way chin vent plus five exhausts. The VAS-V MAX vision visor is Pinlock ready and uses our F1-derived latch mechanism; the semi-removable interior features Facial Contour System (FCS) and speaker pockets
Features: •Arai Super Fibre outer shell construction
•Strong outer shell designed to glance off impact forces while maintaining the integrity
•One-piece multi-density EPS liner to absorb and spread impact energy
•Reinforced Hyper-Ridge lowers centre of gravity and flares out 5mm for easier wear
•Dual intake vents, brow vents and 3-way chin vent
•Five exhausts located to the rear, top and sides
•VAS-V Max vision visor with Pinlock insert included
•F1-derived latch mechanism operates smoothly, even with gloves
•Facial Contour System for lower jaw comfort
•Removable and washable cheek pads
•Double D ring chin strap fastening
•Internal speaker pockets for fitting optional intercom systems
•Optional Pro Shade external sun visor system can be equipped
•Genuine UK Arai helmet
•Five Year Arai Warranty
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
