It is time for a new adventure with the all-new Tour-X5! It’s time to ride the earth!
In stock
✕
Arai Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The Tour-X5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.
One of the biggest changes is the visor system and its visor. The new VAS-A visor system, derived from the VAS-V system developed for the RX-7V, has been designed to maximize Glancing-Off performance, meaning more surface area to glance off impact energy whilst offering easy installation and removal of the visor and peak. The visor itself has been redesigned for increased visibility and Glancing-Off performance, and is now a Max Vision visor, so a Pinlock insert can easily be installed. The new VAS-A visor system also makes it easier to switch, without tools, to one of the other styles. You can choose between Adventure, Off-road and On-road.
Other improvements include a completely new ventilation system. The ventilation system of the Tour-X5 is the second model to feature the 3D logo duct, previously introduced on the Quantic. Complemented by the new AR Spoiler and the latest iteration of the Delta Duct, the Delta Duct 6, the Tour-X5 also features a completely new chin vent. The ventilation system of the Tour-X5 will have ample air flow to keep you cool no matter what, so don't sweat it. Additionally, the inner vent gate can flow air to the mouth or visor for increased defogging. As with any Arai model, ventilation parts like the 3D Logo Duct, AR Spoiler and Delta Duct 6 are made to break off during an impact for maximum Glancing Off performance.
On the inside, the interior is fully removable, with an adjustable pad at the rear of the crown pad. A redesigned nose deflector will make the use of goggles easy. FCS cheek pads will give a firm fit both on- and off-road.
Features •Shell made with Super Fiber coating, a material 30% more resistant than fiberglass and PB-CLC2 compound with high resistance and lightness.
•Internal shell with multi-density EPS lining for greater shock absorption.
•Lateral reinforcements on the chin guard
•Redesigned clear, high-visibility screen with anti-scratch treatment and UV protection. The redesign offers an easier and more accessible screen exchange without tools thanks to the VAS-A system. Predisposition to mount Pinlock® 120 XLT.
•Ventilation system with front entry integrated into the logo for dynamic air flow and three adjustable Venturi extractors to extract moisture and hot air.
•Integrated AR spoiler for aerodynamic aesthetics and improved noise reduction.
•Very light, adjustable and removable visor with an optimal and aerodynamic design; to suit the appropriate on- and off-road style.
•Interior padding made of hypoallergenic and antibacterial fabric. Fully removable and washable.
•Double buckle closure.
•Includes nose deflector suitable for the use of glasses.
•Includes carrying bag.
•ECE 22-06 approval.
•Weight: 1700g (±50g)
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
