The GHOST is the helmet conceived by Caberg for those riders who don’t want to go unnoticed.
In stock
✕
Caberg Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
The aggressive look and shapes are combined with great functionality, that is unique on the market.
This Jet, in fact, is equipped not only with a particular goggle shape visor that adheres to the face thanks to the foam profile along the inner lower side of the visor, but also with a mask easy to use to protect the face from the cold in the winter months and from swallowing too many gnats in the summer time.
Thanks to a spring tilting system, it is very simple and intuitive to open and close the visor with only one hand. This characteristic differs GHOST from the other open face helmets on the market equipped with simple goggle, mask, and standard elastic strap bands.
The GHOST can be used in 4 different configurations: 1) equipped with the visor, the foam profile along the inner lower side of the visor, and the mask; 2) equipped with the visor and the mask, but without the foam profile of the visor; 3) equipped with the visor and the foam profile but without the mask; 4) equipped only with the visor, without the foam profile and the mask. The shell is made of fiberglass and is offered in two shell sizes; it is also available the FULL CARBON version with the shell entirely made of carbon fiber. The visor is anti-scratch and aslo anti-fog to prevent the visor from fogging up.
The lining is completely removable and washable made with breathable fabrics. The finishing of the refined materials and features, all made in Italy, such as the five rivets on the rim, the steel air intakes on the neck devise and the leather inserts, remark the care and attention to details.
The GHOST can be equipped also with the main wireless communication systems available on the market. To customize your GHOST, besides the standard light smoked visor, there are available, as spares, mirrored visors, a full dark visor, and a visor with fluo yellow trim. For a perfect adhesion of the mask foam to the face, Caberg offers the possibility to buy the visor foam profile in 3 different thicknesses: 18mm, 21mm, and 25mm.
Features: •Shell: Fiberglass
•Shell: Carbon (Model Ghost Carbon)
•Double Shell Size
•Anti-scratch Visor With Pinlock Max Vision
•Micrometric Buckle
•Removable And Washable Liner
•"Sanitized" Lining
•Removable Nose Shield
•Goggle Foam Available In 3 Different Thicknesses
•Intercom Ready
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
