https://www.bikestop.co.uk/kriega-front-haul-loop9380Kriega Front Haul Loophttps://www.bikestop.co.uk/media/catalog/product/k/r/kriega-front-haul-loop-top.jpg25GBPInStock/Ride Style/Brands/Brands/Kriega/Accessories/Brands/Kriega/Accessories/All/Accessories/Accessories/All AccessoriesHauling your bike out of the dirt is part and parcel with extreme riding, so front fender straps are essential equipment for enduro riding. The ultra-tough Front Haul Loop is easy to fit easy to find once in place, always at hand to save you precious time to get back on track. With universal fitting and no loose ends, it couldn't be more convenient. For fitting: undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use two cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.25Kriegaadd-to-cart
/Accessories/Accessories/All Accessories
This website requires cookies to provide all of its features. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Allow button below.
For fitting: undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles (making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp. Another method is to use two cable ties linked together in a figure of eight behind the front light/number plastic. The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit.
