Nexx X.R2 Carbon Helmet

Loading...
Carbon fibre sports helmet with aerodynamic noise reducing shape
Out of stock

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

With the Nexx X.R2, the best just got better. The two top vents are redesigned to increase airflow and reduce noise levels, carrying more fresh air directly to the forehead and interior of the helmet. The XR2 spoiler and aerodynamic profile reduce turbulence at high speeds. A race-ready flat face-shield has posts for tear-offs and Pinlock insert (both sold separately). The Easy Lock shield is more soundproof and airtight. The Nexx XR2 is a combination of technology, comfort and protection that helps you keep your mind on the road.

Features:
•Carbon fibre external shell construction
•Refined aerodynamics and aeroacoustics with increased levels of comfort for sport and track
•Super lightweight at approx 1300gr (+/-50g)
•Real side peripheral vision with wide angle viewport
•Pinlock ready visor, prepared for the use of tear-off strips
•Visor easy locking system allows greater soundproofing and hermetic sealing
•Three air inlets including a chin ventilation system for quick defogging
•Four air outlets for hot air expulsion
•Easy Flow EPS liner channels distribute the cool air into the interior while increasing the exhaust of hot air
•3D formed interiors are fully removable and washable with anti-sweat and anti-allergic coatings
•X-Mart Dry fabrics that keep the wearer cool and dry on hot and provide insulation on colder days
•Double D-ring chin strap fastening system
•Reflective details to aid visibility
More Information
SKUAK7239Z:257865
BrandNexx
GenderUnisex
Product TypeHelmets
Main MaterialCarbon Fibre
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockNot Compatible

Nexx Helmets

  

S/M/L Circumference (cm)
2XS 51 - 52
XS  53 - 54
55 - 56
57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
 
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.