Shoei has produced a helmet to accompany you on all your adventures. Well ventilated and comfortable, while giving you the required levels of safety for taking on some of the most difficult terrains riders will face. Can be worn with goggles when really heading of the beaten track.
Out of stock
✕
Shoei Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Features •Dual-layer multi-density EPS liner accommodates a more compact design without compromising ventilation
•EPS liner has been engineered to provide varying densities of foam in key impact areas around the head, providing enhanced impact absorption
•CNS-2 face shield system is 3D injection-molded and offers a distortion-free view
•Innovative ribs on the top ridge of the shield improve rigidity when opening and closing
•QR-N base plate system offers quick and efficient shield removal without having to remove the visor
•Thicker, more durable face shield gasket
•Improved shield locking system
•Pinlock pins and insert included
•3D Max-Dry System II Interior are three-dimensionally shaped to match contours of the rider's head, allowing a comfortable fit while maintaining a firm hold for high speed riding
•3D shaped cheek pads are available in multiple thicknesses for a custom fit
•Max-Dry System II liner material quickly absorbs and dissipates sweat and moisture
•Removable ear pads
•E.Q.R.S. (Emergency Quick-Release System) allows emergency personnel to easily remove cheek pads from an injured rider's head
•The V-460 Visor is the result of many hours in Shoei's wind tunnel and features an innovative wedge shape with strategically placed vent louvers which allow wind to pass through unobstructed at high speed
•Air is pushed into the helmet's upper air intake by the visor for optimal cooling
•Quarter turn screws allow for easy, tool-free removal of the visor
•Large multi-position lower air intake/defroster vent
•Two shutter-controlled upper air vents
•Four uniquely-positioned rear exhaust vents
•Three neck outlet vents
•Includes a removable breath guard and chin curtain to complete the comfort package
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
