Shoei are masters of producing quality helmets and the RYD is the latest offering. Built to be quiet, light and strong with all the features included to make this helmet perfect for long journeys. Hand laid construction to ensure everything is perfect. The helmet is supplied with a removable chin curtain.
Out of stock
✕
Shoei Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Design Concept •Advanced short-distance street performance and long-distance touring comfort
•Compact, aerodynamic shell design with sharp and aggressive styling
•Optimal shell aerodynamics and liner components reduce unwanted road noise
•Matte black ventilation components enhance aggressive styling
•Streamlined function and affordability
Ventilation Performance •Large lower vent shutter for ease of use with riding gloves
•Two upper air vents for optimal air intake
•Two uniquely-positioned upper exhaust vents for improved negative pressure suction
•Wind-tunnel optimized to balance enhanced airflow and silence
Visor System •Protects from 99% of the sun’s damaging UV rays
•3D injection-molding ensures distortion-free view throughout the entire field of vision
•Innovative ribs on top and bottom edge improve rigidity and eliminate bending
•Advanced shield locking mechanism
•Comes equipped with Pinlock Evo fog-resistant system
Base Plate System •Facilitates quick and smooth shield changes
•Shoei’s patented spring-loaded technology ensures a wind and waterproof seal
•Strengthened springs for more precise functionality
•Innovative five-stage rotating dial for shield/base plate fine-tuning
Safety •Proprietary technology integrates a multi-ply matrix
•Hand-laid interwoven layers of fiberglass with organic fibers and resin
•Shoei's strongest, lightest, most elastic shellÂ
Dual-Layer/Multi-Density Eps Liner •Provides enhanced impact absorption by utilizing varying densities of foam
•Allows cooling air to travel unrestricted through tunnels created in the EPS
•Precise placement of multi-density EPS material yields a more compact, lightweight design
•4 Shell Sizes - Best fitting, minimal weight
Emergency Quick Release System (Eqrs) •Allows emergency medical personnel to safely remove the cheek pads from an injured rider’s helmet
•Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck
Comfort •Fully removable, washable, replaceable and adjustable
•Three-dimensionally shaped to match the contours of a rider’s head
•Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
