An RX-7V is everything Arai knows about producing the ultimate competition-ready motorcycle helmet. The strong, smooth and rounded R75 shape shell; to increase the important glancing-off performance. VAS system. Peerless fit. Ventilation that maintains a rider’s cool. And the RX-7V Racing goes one step further with an extra layer of technology.
Out of stock
✕
Arai Helmets
S / M / L
Circumference (cm)
XS
53 - 54
S
55 - 56
M
57 - 58
L
59 - 60
XL
61 - 62
2XL
63 - 64
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Ventilation: •RX-7V Ventilation
•Eyeport Airchannel
•Free Flow System (FFS)
•Center top vent - intake
•Diffuser system
•Brow vents extended to temple area
•Three position chin vent
•Neck exhaust vent
•Side exhausts
Aerodynamic: •Pull Down Chin Spoiler
•Patented Air Wing® adjustable
•Aerodynamics: Diffuser Extention-2
Visor: •2D visor with tear-off posts
•New shield latch system
Interior: •Replaceable Cheek pads/Ear cups
•Antimicrobial Liner material
•Speaker pockets
•Facial Contour System (FCS)
•Replaceable Interior
•Replaceable Chinstrap covers
•Replaceable Neckroll
•5mm ’’Peel Away’’ Ear cups/Cheek pads
•5mm ’’Peel Away’’ Temple pad
•Thin centre pad for more room in front area
Comfort: •Emergency Release System (ERS)
General: •Outer shell: PB-SNC2 (Peripherally Belted Structural Net Composite)
•Variable Axis System (VAS)
•Glancing Off
•Five times inspected
•Washable interior
•Handmade
•All-day comfort
•Penetration tested
•Double-D ring device
•Smooth shape, better protection
•Strong outer shell, soft inner shell
•Organic shape
•5-year limited warranty
•Different outer shells
•Arai In-house test
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
