Bell MS GT6 (HANS) FIA8859/SA2020

Loading...
As low as £736.99
The GT6 features the same modern and aggressive design as HP6, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an lightweight Premium carbon glass shell. Including head and neck support (HANS) pins.
In stock

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional ear-muffs providing optimal noise insulation, with fully integrated radio communication kit and hydration systems

Features:
•Ultra-lightweight Premium Composite shell.
•Wide eyeport opening for optimal vision in closed cockpit cars (Shield type SE06).
•Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.
•Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems.
•Extraction vents to maximize cooling and air circulation.
•Factory installed Hans anchors as original equipment.
•Optional Top and Side air intakes available for use with external cooling system.
•Optional side-cover (L or R) for smooth integration of radio connectors and hydration system.
•Optional Ear-Muffs for increased noise insulation.
•Interior: Dark Grey High Strength – High Comfort FR Fabric.
•Homologation: FIA8859-2015 / SNELL SA2020.
More Information
SKUJA1035:27086165
BrandBell
GenderUnisex
Product TypeHelmets
Ride StyleRacer & Track Day, Sports
Main MaterialCarbon Fiberglass
Helmet LiningNot Removable
Helmet TypeFull Face
Strap TypeDouble D-Ring
PinlockNot Compatible

Bell Helmets

  

S / M / L Circumference (cm)
2XS 54 - 55
XS  56
57
M 58 - 59
61 - 62 
XL 63 - 64
2XL 65 - 66
3XL 67 - 68

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
 

Klarna Finance Options

Now you can shop with us and pay later with Klarna.