Based on the HP10 Rally, the MAG-10 RALLY CARBON is a sophisticated, ultra-lightweight Premium Helmet in a sleek and modern design that provides a high performance open-face rally helmet.
In stock
✕
Bell Helmets
S / M / L
Circumference (cm)
2XS
54 - 55
XS
56
S
57
M
58 - 59
L
61 - 62
XL
63 - 64
2XL
65 - 66
3XL
67 - 68
How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Featuring an ultra-lightweight carbon composite shell combined with our Fast Removable Half Chin Bar (HCB), adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, highly comfortable professional fit combined with outstanding sound-insulation, MAG-10 RALLY CARBON is the new helmet of choice for rally drivers and co-drivers looking for a high-end Premium product. Benefiting from the extensive Research & Development program undertaken for the HP10, the MAG-10 RALLY CARBON sets new standards in the Premium Helmets category! No effort was spared to obtain outstanding performances of sound insulation and communication efficiency, incorporating ZeroNoise® electronics, high power speakers and noise cancelling microphone, and to deliver the best experience in terms of safety, comfort and communication.
Features: •Open face helmet featuring ultra-lightweight Premium carbon composite shell
•Fast Removable Carbon Half Chin Bar (HCB) quickly and easily detachable to ensure fast access to breathing ways without the need to remove the helmet in case of emergency
•Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
•Adjustable carbon sun peak
•Adjustable integrated anti-scratch dark smoked sunscreen
•Integrated cheek pads with multi densities advanced materials for optimal comfort
•Flexible yet sound insulating integrated ear muffs for comfort combined with sound insulation
•ZeroNoise® electronics, high power (yet lightweight) speakers and efficient noise cancelling microphone.
•Ultra-reliable heavy duty In-Moulded Female Nexus Connector (compatible with other brands of amplifiers)
•Detachable right side-cover for smooth integration of the Female Nexus Connector
•Flat right side cover supplied in the box, for those who prefer using a straight cable coming out of the helmet instead of the integrated connector
•Factory installed Hans anchors as original equipment
•Interior: Dark Grey High Strength – High Comfort FR Fabric
•Adjustable sunscreens available as accessories in various colours and TWO lengths to ensure optimal visual comfort
•Homologation: FIA8859-2015 & SNELL SA2020
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
Put the helmet on - it should be a little tight as it goes on over the head
The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
