Scorpion ADX-1 Helmet - Plain

Loading...
As low as £209.99
The ADX-1 is a versatile modular helmet in the adventure touring field. The ADX-1 can either be used as a full-face adventure helmet with the peak visor attached, or with it removed to give an aerodynamic touring helmet. The wide eye port gives excellent visibility and the modular chin-bar can be flipped up when not riding. The drop down sun-visor and KwikWick II liner will keep you comfortable whatever the conditions. Additionally the no-fog Everclear face shield can be removed and you can use the ADX-1 as an off-road dirt helmet. Three shell sizes made of Advanced LG Polycarbonate and dual density EPS, result in a helmet that is lightweight but protective and robust. NOTE: This helmet comes with a clear visor only.
In stock

Scorpion Helmets

  

S / M / L Circumference (cm)
XS  53 - 54 
55 - 56 
M 57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
Availability | Choose any product for delivery message
Scorpion ADX-1 Helmet - Plain
Scorpion ADX-1 Helmet - Plain

PRODUCT DETAILS

General Features
•Shell in thermoplastic resin: silent and aerodynamic conception for a comfort tested in wind tunnel
•Chinbar reinforced with EPS for a top front protection
•Ventilation system: 3 indexed air-intakes adjustable independently (1 at the level of the chin, 1 on the top, 1 on the back), create a depression and optimize the airflow through the helmet
•Nose guard: improves the performances of the anti-fog coating of the shield
•Chin strap buckle with micrometric setting for a perfect and reliable adjustment
•Removable visor to switch to a perfect offroad use
•ECE 22-05 Approved
More Information
SKUAJ0046:214666
BrandScorpion
GenderUnisex
Product TypeHelmets
Ride StyleAdventure, New Biker, Commuter & Scooter, Touring
Main MaterialThermoplastic resin
Helmet LiningFully Removable
Helmet TypeFlip Up
Strap TypeRatchet Strap
PinlockPinlock Ready

Scorpion Helmets

  

S / M / L Circumference (cm)
XS  53 - 54 
55 - 56 
M 57 - 58
59 - 60
XL 61 - 62
2XL 63 - 64
3XL 65 - 66

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.