Shark D-Skwal 3 Helmet - Mayfer

Loading...
Regular Price £219.99 As low as £208.99
The third generation of the D-SKWAL makes its mark with an even more aggressive look and exceptional new standard features.
In stock

Shark Helmets

  

S / M / L Circumference (cm)
XS  53 - 54
55 - 56
M 57 - 58
59 - 60
XL 61 - 62

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing
*Terms and conditions apply.
Availability | Choose any product for delivery message

PRODUCT DETAILS

The D-SKWAL 3 is a full-face helmet that combines technical features and comfort thanks to a design and development process focused on performance, successfully meeting the UNECE 22-06 standard. All the elements of SHARK's D-SKWAL 3 helmet are specifically combined to optimise its use: its HIGH-IMPACT LEXAN™ polycarbonate injected shell structure is combined with multi-density EPS liners to reinforce the helmet's overall strength, and the high-strength, optical class 1 anti-scratch screen, equipped with Pinlock® 70, is fitted with a quick-release system but also accompanied by Pinlock® tension adjustment levers. Comfort features and equipment include the "BEST FIT" by SHARK liner, as well as the screen lock in the air mesh position and the integrated anti-scratch, anti-fog sun visor. The D-SKWAL 3 is also compatible with the Sharktooth® Prime intercom.



Features:
•2 high-impact Lexan™ injected polycarbonate shell sizes
•Multi-density eps padding
•Highly resistant optical class 1 anti-scratch visor with pinlock® 70
•Anti-scratch & anti-fog sun visor
•Visor locking system with air inlet position
•UN ECE 22-06 certification
•Original motifs & design
•Patented rapid, no-tool visor removal system
•Pinlock® tension adjustment pins
•“Best fit” by shark
•Intercom compatibility
More Information
SKUJB0033:27110349
BrandShark
GenderUnisex
Product TypeHelmets
Ride StyleAdventure, New Biker, Commuter & Scooter, Sports
Main MaterialThermoplastic
Helmet LiningFully Removable
Helmet TypeFull Face
Strap TypeRatchet Strap
PinlockPinlock Provided

Shark Helmets

  

S / M / L Circumference (cm)
XS  53 - 54
55 - 56
M 57 - 58
59 - 60
XL 61 - 62

 

Head Size

How to Measure
To find the right helmet size, measure all the way round your head at the widest point. Keep the tape measure above your ears and make sure that the tape measure is not too tight, nor too loose. Take your measurement in centimeters (cm), not inches.
 
Checking for Best Fit
When a new helmet is first worn, it should actually be slightly tight, with the interior coming into contact with most of the head, but not so restrictive that it causes any pain. There should be no "hot spots" - places where the helmet's interior puts pressure on specific points of the skull or face - but it should not move around freely. With time, a helmet will adjust to match the shape of the rider's head as it is worn and goes through "break-in" and loosens up a little. However, it should never become loose enough to easily turn from side to side.
  • Put the helmet on - it should be a little tight as it goes on over the head
  • The helmet should sit on the head evenly with the eye port's upper edge sitting just above the eyebrows and have good peripheral vision available to see side-to-side
  • Try putting a finger between the helmet interior and the head. If it easily fits, a smaller size should be tried next. Note that some helmet models allow for the cheek pads to be changed out for better fitment, so consider this too when checking for proper sizing

Klarna Finance Options

Now you can shop with us and pay later with Klarna.