Sidi Mag-1 CE Boots - Gold Bautista Limited Edition
Sidi Mag-1 CE Boots - Gold Bautista Limited Edition
As low as£389.99
Technology and practicality are the keywords to describe the Mag-1 race boot.
In stock
✕
Men's Sizes - Sidi Boots
UK Size
EU Size
Foot Length (cm)
5
38
24.5
5.5
39
25.0
6
40
25.5
7
41
26.0
8
42
26.5
9
43
27.0
10
44
27.5
10.5
45
28.0
11
46
28.5
12
47
29.0
13
48
29.5
How to Measure
It's easy to find the right shoe size, just place both feet (in your normal riding socks) on a piece of paper and carefully draw the outline of each foot. Make sure you keep the pen pointing straight down to get a true outline! Then measure the lengths of both outlines from the top edge of your big toes to the back edge of your heel. If your two feet measure differently, take the longer of the two measurements and that's your size - all measurements in centimetres (cm).
Helpful Hint
Remember to wear your normal riding socks and if you ride around the year you might want to make a bit of allowance for thicker winter socks.
Technology and practicality are the keywords to describe the Mag-1 race boot. Precise, comfortable and with an enviable look, Mag-1 is the boot suitable for those who want to run on the track or dedicate themselves to city journeys.
Features •REPLACEABLE SHIN PLATE – Shin Plates Can Be Detached By Loosening Removable Screws.
•TECNO-3 MAGNETIC CLOSURE SYSTEM is easy and quick to use as well as being highly adjustable and light in weight. The TECNO-3 MAGNETIC closures close the boot with an extremely resistant steel wire, that is hooked to the clip with the aid of a magnet. Mechanisms and retaining clips are replaceable.
•MICROMETRIC MEMORY STRAPS adjust the leg circumference to fit around the calf muscle.
•TPU BANDS – Arch and achilles areas are covered with Sidi’s exclusive elastic textile and injection molded polyurethane comfort panels. The arch area utilizes two TPU bands next to the TECNO-3 Magnetic closures, for a maximum support and wrap of the arches.
•SUPPORT BRACES SYSTEM – The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under the TECNO-3 Magnetic mechanism, the other one the inside which holds the micrometric adjuster strap. The screws support and block the internal support system which is made with glass fiber beams, making up the frame of the boot. This system allows excellent flex movement front-to-back while being firm side-to-side.
•ASYMMETRIC HEEL CUP – Asymmetric and shaped shock absorbing heel cup, smooth and flat inside, for more adherence with the bike, with shock absorbing system in the back and outside. The shell and the shock absorbing system are replaceable through a screw and an interlocking system.
•VORTICE SLIDER – The toe slider is made in nylon reinforced with fiberglass. It is fitted with an intake and an innovative alloy insert.
•ELASTIC TEXTILE AND INJECTION MOULDED TPU BANDS
•HIGH RESISTANCE TPU SHIFT PAD
•ALL COMPONENTS ARE REPLACEABLE
•100% VEGAN FRIENDLY
•UPPER: Technomicro Microfiber
•LINING: AIR TEFLON MESH / CAMBRELLE
•SOLE: Top Rubber Sole
It's easy to find the right shoe size, just place both feet (in your normal riding socks) on a piece of paper and carefully draw the outline of each foot. Make sure you keep the pen pointing straight down to get a true outline! Then measure the lengths of both outlines from the top edge of your big toes to the back edge of your heel. If your two feet measure differently, take the longer of the two measurements and that's your size - all measurements in centimetres (cm).
Helpful Hint
Remember to wear your normal riding socks and if you ride around the year you might want to make a bit of allowance for thicker winter socks.
Klarna Finance Options
Now you can shop with us and pay later with Klarna.
